Best Amp For Klipsch RP-600M Bookshelf Speakers

YAMAHA R-S202BL Bluetooth Stereo Receiver

If you’re looking for a power station with it all, the Yamaha R-S202 Receiver is worth checking out. One of the best things about the Yamaha R-S202 is that it can handle a wide range of music genres and has many features. You can also use this Receiver to watch movies, whether blockbusters or indie flicks. This Yamaha R-S202 Receiver will give them all the power any Klipsch Speakers need. In terms of the design, it has a brushed aluminum finish and a simplistic design.

This Yamaha R-S202 Receiver has 40 preset FM/AM stations and a frequency response of 10Hz - 100kHz (0 plus/minus 0.5 dB / 0 plus/minus 3.0 dB). With an input sensitivity of 500 MV/47k ohms and speaker selector for two systems, the Yamaha R-S202 Receiver has an advanced circuitry design and is excellent for Klipsch RP-600M speakers. The Two channels of 100 W high-power output are provided by the R-S202BL, which matches RP-600M power specifications. So, with an R-S202BL receiver, you can drive the RP-600M  speaker at loud volume levels without distortion.

In addition to Bluetooth connectivity and dual speaker terminals for two speakers, the Yamaha R-S202 Receiver provides automatic power standby capability. On R-S202, you will also find speaker selectors and speaker terminals, which you can use to connect two speaker systems with it. About 4000 people showed positive ratings for the R-S202BL receiver and found it a very beneficial powerhouse for their speakers.

Your RP-600M speakers will benefit significantly from the Yamaha R-S202 Receiver because it provides a high level of power performance, so your RP-600M or other speakers will deliver true sound quality with clear vocals and accurate imaging. The R-S202BL features an input sensitivity (CD) of 500 MV/47k ohm. So overall, for those seeking more power for their Klipsch RP-600M, the Yamaha R-S202 Receiver is an excellent choice for under $200, and we recommend this powerhouse to budget-conscious music lovers. So overall the Yamaha R-S202 is the best receiver for Klipsch speakers.

See: How to bridge four-channel amplifier

Denon PMA-600NE Stereo Integrated Amplifier

The Denon PMA-600NE stereo integrated amplifier is one of Denon’s flagship products, featuring a wide range of features and performance that will make your music sound incredible and divide circuitry (disengage digital circuits). The Denon PMA-600NE has several features that set it apart from similar models, and you will get a multidimensional sound experience thanks to the amplifier’s HD audio decoding and support for Dolby Atmos and DTS:X virtual surround sound formats.

Additionally, the PMA-600NE amplifier has analog and digital input ports to connect external audio sources. The Denon PMA-600NE is an excellent home theater upgrade that won’t break the bank. The Denon PMA-600NE powers your speaker with 45 watts x 2 channels (8 ohms) and 70 watts x 2 (4 ohms), which is enough power to drive RP-600M speakers. The PMA-600NE also includes optical, coaxial, and phono inputs (connect CD players, Blu-ray players, turntables, and more).

There is also a built-in 192 kHz/24-bit D/A converter featured by Denon PMA-600NE for a clear and original audio signal (higher sample rating). So overall, for under $500, this PMA-600NE amp provides a slim vibration-resistant design and good power, and 400 +  people show great love and affection to this Denon slim powerhouse and spread positive ratings.

Yamaha A-S301BL Amplifier

Yamaha’s AS301 amplifier is an excellent choice for audiophiles who require a powerful amplifier, featuring digital audio inputs (for TV or Blu-ray player), ART (Anti-Resonance and Tough) base, and 6,800uF block capacitors.  The Yamaha AS301 is an amplifier designed to be used for powering a wide variety of speaker systems, offering excellent sound purity and high-quality components. With ToP-ART (Total Purity Audio Reproduction Technology), this AS301 amplifier can be used for both home audio and car audio, delivering super-quality sound.

The Yamaha AS301 amplifier is the ideal choice for powering your Klipsch RP-600M bookshelf speaker system since it delivers plenty of power to your speakers for high-quality sound. This baby of Yamaha provides a Direct symmetrical design, great I/O (input to output), and extruded aluminum heat sinks for heat consumption and continuous loudness control, allowing you to enjoy your party music. As the AS301 has a 60 W x 2-ch (20 Hz - 20 kHz) power delivery capability, it matches the Klipsch RP-600M power handling rating, allowing it to drive it perfectly. Get clear Dialogue Clarity now!

I was pleasantly surprised to find that this Yamaha AS301 amplifier came with its own custom power transformer when I tested it in the lab with Klipsch RP-600M speakers. With its simple yet sophisticated design (aluminum front panel and knobs), the AS301 is sure to pack a punch and can handle some severe volume without breaking a sweat. You can get this AS301 Stereo amp in the $400 range, and it gives you more features and performance than its sibling R-S202BL. An excellent rating of 900+ people was given to this AS301 amp, which is a plus point.

NAD Electronics D 3020 V2

This classic NAD Electronics D 3020 V2 amplifier will cost you less than $500, but it’s totally worth it. This powerful NAD mini amplifier offers natural high-fidelity sound to a new generation of music enthusiasts. With its big, warm, detailed sound, this tiny treasure outperformed amplifiers that cost ten times as much and will also add style to your RP-600M bookshelf speakers. 

Today, it is more likely that one will listen to music on a computer or smartphone than on a turntable, but choosing speakers to meet one’s taste remains a compelling reason for upgrading to an NAD amplifier. The amplifier is based on the original NAD 3020 idea and works well with the Klipsch RP-600M. The NAD Electronics D 3020 V2 also offers a phono input for vinyl playing and a 24/192 DAC with eight channels blended to 2 for enhanced resolution. The NAD D 3020 V2 has 30 watts per channel of power, and according to NAD, this 30W amplifier can provide 100W amplifier performance. And accordingly, when we powered the Klipsch Speaker, the sound was amazing. So, this classic NAD D 3020 amp is enough to drive the RP-600M speakers to loud volumes.

The 30W per channel may seem like a minimal power output. Still, like with other NAD amplifiers, this is quite deceiving since a correctly constructed 30W amplifier may sound superior to a 100W amplifier from a lesser manufacturer. The NAD D 3020 will astonish many with its compact form factor and ability to drive problematic loudspeakers to adequate levels without adding noise or distortion. As compared to the YAMAHA R-S202BL receiver, you have to increase the budget for purchasing the NAD D 3020 amp. Under $500, this NAD D 3020 not only provides good amplification performance but also sleek and elegant design.

Marantz PM6007 Integrated Amplifier

Marantz PM6007 amplifiers can be used to improve the sound quality of Klipsch RP-600M by powering them with them. This PM6007 amp gives you more features under the $700 range, including digital filter modes for optical/coaxial input and the preamp section.

The Marantz PM6007 provides the best sound quality in its class and is capable of delivering 2 x 45W (8 ohms RMS, 20Hz - 20kHz), making it compatible with drive Klipsch RP-600M speakers. With independent volume and power controls, the Marantz PM6007 also includes a 3.5mm input to connect Android phones and laptops. The PM6007 is meticulously and masterfully tuned and comes with a high-quality DAC AK4490 for a cleaner sound.

Both these PM6007 and PM7000N amplifiers by Marantz are rated by less than 100 people on Amazon. I found a low average rating with fewer people, as Yamaha A-S301BL and some other amps rated higher with higher averages by hundreds of people. Why am I recommending PM7000N and PM6007 amps? Because they can drive your RP-600M speakers perfectly, and it’s my duty to show you the perfect option. My Final words are: PM6007 is a great partner for Klipsch Speakers and other speaker models only if you match power handling specifications properly (Amp Power + Speaker Power Handling).

Read: Where to connect remote wire for amp.

Yamaha A-S501 Amplifier

Here is another amplifier by Yamaha, which is the A-S501. For years, Yamaha has produced high-quality audio equipment, and their A-S501 is perfect for Klipsch RP-600M speakers as it has a power output of 85 W (power watts), making it a well-known name in the music industry. Yamaha A-S501 amplifier features a frequency range of 20 Hz to 20 kHz, 12,000 F block capacitors, and digital audio inputs (for pairing with TVs and Blu-ray players).

Design-wise, the A-S501 is simple yet sophisticated and features an aluminum front panel which controls various controlling knobs. The Yamaha A-S501 features gold-plated speaker terminals/RCA terminals and continuously variable loudness control. The question arises: is the Yamaha A-S501BL worth purchasing? The Answer is Yes! Due to its excellent power management and features, about 900+ people showed positive feedback. 

The A-S501 can also handle a wide range of audio files due to its tonal range of low to high frequencies and direct symmetrical input and output. With an ART (Anti-Resonance and Tough) Base, extruded aluminum heat sinks, and a custom-made power transformer, you can tune your speakers easily with the Yamaha A-S501. As compared to the R-S202BL, this one is a bit higher in price but filled with more features as well. Check these 1000 Watt Amps for decent power delivering.

Denon AVR-S540BT 5.2 Channel Receiver

Note: The Denon AVR-S540BT 5.2 Channel Receiver is presently out of stock in the market. However, it could be restocked in the future. Upon AVR-S540BT re-availability, we will promptly update this notice.

The Denon AVR-540BT powerhouse (Japanese precision technology receiver) is suitable for Klipsch RP-600M powerful speaker owners. The Denon AVR-540BT amplifier will boost low frequencies on your Klipsch RP-600M and provide more power for high-volume listening. The Denon AVR-540BT receiver offers an intuitive control panel that lets you tweak the audio settings and provide excellent sound quality to create the perfect listening experience.

Additionally, the AVR-540BT amp has a built-in digital tuner for easy tuning of your favorite stations, and this discrete 5-channel amplifier is also well-known as a high-current amplifier (70W per channel at 8 ohms). The AVR-540BT also features advanced BK HDMI connection (8K/60Hz, 4K/120Hz, HLG, HDR, Dolby Vision, HDR10+) with having 8K upscaling is supported (four HDMI inputs / 1 output) picture quality and also supports Dolby TrueHD and DTS-HD for high fidelity and integrated multi-room audio system ( Denon HEOS LINK). The Denon AVR-S540BT features 70W per channel at 8 ohms; you can adjust power and drive your Klipsch speakers for good sound.

This Denon amplifier was designed with high-fidelity audio in mind, so anyone seeking an amplifier with a variety of audio needs will find the Denon AVR-540BT is an excellent choice. As compared to NAD Electronics D 3020 V2, YAMAHA R-S202BL and A-S301BL, and Denon PMA-600N, this AVR-S540BT By Denon is a little expensive and comes Under the $650 range. In spite of that, Denon AVR-S540BT has over 3000 positive reviews, proving its popularity.

Marantz PM7000N Amplifier

Here is another variant of Marantz, the PM7000N, which features a sleek design and powerful performance. This Marantz PM7000N has been praised by audio enthusiasts worldwide. There are four analog inputs, one analog output, one coaxial digital input, two optical digital inputs, and a USB-A input for easy connections.  A range of speakers can be powered with the Marantz PM7000N amplifier, which features a versatile design.

The Marantz PM7000N is equipped with HEOS Built-in technology (Play Spotify, Pandora, and Tidal using AirPlay 2, Wi-Fi, and Bluetooth) and produces high-quality sound with 60 watts per channel. With the Marantz PM7000N, you get great sound quality at an excellent value.

The PM7000N delivers hi-resolution audio, and it processes ALAC, FLAC, WAV, DSD; and it has HDAM-S3 circuit boards and a toroidal transformer, which makes it a high-quality amplifier. The PM7000N amplifiers also have three sets of RCA inputs (front, center, and rear) and headphone jacks on the front panel. The PM7000N amplifier offers an onboard power supply so you can listen to vinyl music with your turntable connected to the phono input.

The design of Marantz PM7000N is very human; it features a Class D design and operates at low power consumption. For better control, remote technology features for managing this PM7000N amp volume control, mute, and power on/off functions by remote control. Additionally, the PM7000N amplifier offers a multi-channel input for connecting multiple audio devices and an output for connecting an external speaker. As I already mentioned while reviewing the Marantz PM6007, In the market of amplifiers, the Marantz amps don’t have strong popularity as compared to Yamaha and Denon. For PM7000N, I found about 90+ ratings with a one percent decrease, which may confuse you while purchasing it. But, you need only an amp for RP-600M? Right? So don’t overthink it will smartly drive your Klipsch speakers.

Do you love to enjoy music while jet skiing?